VeEX RXT-6000e User Manual Download Page 380

Page: 380 / 387

Viewing Packet Capture Results

When viewing results, Wire shark will launch and display the results.

The file is stored in the Files folder. It can be viewed on the test set or exported and analyzed on PC Wireshark. For more

information on viewing and exporting files, see the RXT-1200 User Manual on

www.veexinc.com

The Packet Capture results screen is divided into three parts with all details of the capture. The size of each part can be manually

adjusted.

Packet Capture Results on Wireshark

Top section:

Time

Source

Destination

Protocol

RXT-6200_RXT6000e_Module_Manual

Page 380 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands