VeEX RXT-6000e User Manual Download Page 234

Page: 234 / 387

RFC 2544 Setup - Layer 2 parameters

Go back to top

Go back to TOC

13.3.1 Setup - Standard Mode

Unless otherwise noted, the Frame Header and related setups are identical to the setups described in the BERT

Application above. A summary of the RFC 2544 setup options are outlined below.

13.3.1.1 Header Settings

RFC 2544 Profile:

Load a previously configured test profile or create a new profile from existing settings.

Please see

6.0 Profiles

in the

ReVeal MTX300 manual

for more details on how to create new profiles using

ReVeal software.

Encapsulation Type:

None or

Provider Backbone Bridge (PBB-TE):

Provider Backbone Bridge MAC-in-

MAC (IEEE 802.1ah) encapsulation are configured trunks that add resiliency and configurable performance

levels in the provider backbone network. Available for 1GE Copper/Fiber and 10GE port. PBB encapsulation is

available for all Ethernet tests (Layer 2, 3 and 4) - BERT, RFC2544, Throughput, V-SAM.

Tap the PBB block to configure the settings. All PBB fields are configurable.

Backbone MAC Source

Backbone MAC Destination

Ethernet Type

I-SID

Backbone VLAN ID, Priority, Type

RXT-6200_RXT6000e_Module_Manual

Page 234 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands