VeEX RXT-6000e, User Manual

Page: 278 / 387

Throughput Results - Global Stream Summary
Go back to top Go back to TOC
The Aggregate screen displays these parameters:
Line Rate (Mbps) : Negotiated rate of the interface (10M, 100M, or 1000M). This value is always fixed since it
depends on the maximum capacity of the link under test, hence the test interface that is configured.
Framed Rate: (P MAC/IP VLAN Tag + Type/ CRC) / (P Total Overhead)
* Line Rate % (in Mbps).
Data Rate: Payload / (P Total Overhead) * Line Rate %.
Utilization:
% of Line Rate. For example, if we transmit 100Mbps on a 1Gbps interface then the utilization
value is 10% (or 100Mbps) of the total link capacity (or Line Rate).
Total # of frames, bad frames, and pause frames.
Throughput Results - Global Aggregate
Go back to top Go back to TOC
The
Global Signal
screen (fiber ports only) displays the optical level measured by the SFP or XFP transceiver.
RXT-6200_RXT6000e_Module_Manual Page 278 of 387