VeEX RXT-6000e User Manual Download Page 63

Page: 63 / 387

Errors/Alarms (Page 3)

Page 3 lists the Section and Line Overhead Alarms in logical order associated with the signal under test. All alarms are

evaluated and stored. The Elapsed Time [ET] since the start of the test is shown in the upper right hand corner.

The alarms associated with the Section and Line are displayed separately for ease of interpretation.

Errors/Alarms (Page 3)

Go back to top

Go back to TOC

Errors/Alarms (Page 4 & 5)

Page 4 & 5 lists the High Order Path and Low Order path in logical order that are associated with the signal under test.

All alarms are evaluated and stored.

Errors/Alarms (Page 4)

RXT-6200_RXT6000e_Module_Manual

Page 63 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands