VeEX RXT-6000e, User Manual

Page: 333 / 387

Go back to top Go back to TOC
Alarm and Error Injection
Alarm Injection: Each alarm can be set to Continuous or Count
CPRI Alarms:
LOS: Trigger a Loss of Signal event (Laser OFF)
LOF: Trigger a Loss of Framing event. The Z.0.0 control byte is modified to send an invalid byte of value 0xff
SDI: Service Defect Indication is transmitted in the Control bytes for L1 inband protocol
RAI: Remote Alarm Indication is transmitted in the Control bytes for L1 inband protocol
RLOS: Remote Loss of Signal is transmitted in the Control bytes for L1 inband protocol
RLOF: Remote Loss of Framing is transmitted in the Control bytes for L1 inband protocol
Alarm Flow:
Continuous
Count: 0.1s, 1s, 10s, 100s
Error Injection:
Error Mode:
Pattern: BIT - Bit error injection in test pattern
CPRI: Code: 8B/10B Code violation error injection
Error Flow:
Single
Count: Enter the value
Rate: 1E-3, 5E-4, 2E-4, 1E-4, 5E-5, 2E-5, 1E-5, 5E-6, 2E-6, 1E-6, 5E-7, 2E-7, 1E-7, 5E-8, 2E-8, 1E-8, 5E-9, 2E-9, 1E-
9
Alarm and Error Injection
RXT-6200_RXT6000e_Module_Manual Page 333 of 387