VeEX RXT-6000e, User Manual

Page: 218 / 387

Type: The following selections are possible:
8100 (IEEE 802.1Q tagged frame)
88a8 (IEEE 802.1ad Provider Bridging)
Drop Eligible: If enabled, drop eligibility flag will be set.
VLAN Flooding: Enable/Disable.
VLAN Flooding Range:
Specifies the number of VLAN IDs. Enter a number from 0-4096. The VLAN
IDs will be incremented by 1 until it reaches the number of times entered in the flood range.
IEEE 802.1Q VLAN Tag in an Ethernet Frame
BERT Setup - VLAN Tag configuration (Layer 3)
Go back to top Go back to TOC
MPLS Tab:
In the MPLS tab the following parameters are configured:
MPLS label: Configurable in the range 16 through 1,048,575 (labels 0 to 15 are reserved).
Composed of 20 bits which allows for the creation of over one million labels.
CoS:
Configurable in the range 0 to 6.
This field is three bits in length and maps directly to IP Precedence TOS bits to provide Class of
Service (COS).
S-bit: Configurable 0 or 1.
The S field is one bit in length and is used for stacking labels. This is important as it is used to indicate
the last label in the label stack.
RXT-6200_RXT6000e_Module_Manual Page 218 of 387