VeEX RXT-6000e User Manual Download Page 24

Page: 24 / 387

Tx Structure Setup - Graphical Mode

AU4 Mapping:

VC4-64C, VC4-16C, VC4-4C, VC4, VC3, and VC12 are available.

AU3 Mapping:

VC3,VC12, and TU11/VC11 are available.

Bulk:

Tap the check box to enable the setting. In bulk mode, the entire VT container is filled with a test pattern per

ITU-T 0.181 recommendations.

Tributary:

Preset to DS1, E1, DS3, and E3 depending upon the options and mapping.

Channel Selection:

The Tx channel is selected by entering the STM-N, TUG-3, TUG-2, and TU-12 numbers for the

channel.

RXT-6200_RXT6000e_Module_Manual

Page 24 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands