VeEX RXT-6000e User Manual Download Page 202

Page: 202 / 387

Errors/Alarms (Page 5)

Errors/Alarms (Page 7)

Page 7 lists the

BERT Errors/Alarms

in logical order that are associated with the signal under test. All alarms are

evaluated and stored.

Errors/Alarms (Page 7)

Go back to top

Go back to TOC

12.4.3 Event Log

The Event log tab brings up the screen listing the error and alarm events recorded during a test. The events are

presented in chronological sequence - number, type of event, start time, duration (alarms), and ratio/count (errors) are

displayed.

Number (#):

Event number; events are numbered sequentially.

Type:

Indicates alarm or error type.

Start:

Indicates when the alarm or error was detected.

Dur/Count:

Indicates for how long the alarm or error was detected and provides duration (alarms) and

ratio/count (errors). The duration format is day:hour:minute:second.

RXT-6200_RXT6000e_Module_Manual

Page 202 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands