VeEX RXT-6000e User Manual Download Page 210

Page: 210 / 387

10GE Port Setup

Go back to top

Go back to TOC

10 GE Port

10GE Mode:

LAN or WAN

WIS Mode

(only available in WAN mode): SDH or SONET

Flow Control:

Enable chosen as default option

Clock Offset (ppm):

The frequency may be offset in parts per million

Status

Status tab

The

Status

tab lists current port settings. Please note that the Status tab is only available if a fiber port option is

selected from the

Test Port Selection

menu.

Test units shipped before January 2012 support up to +/- 50 ppm offset only. Units shipped from 2012 onwards,

support up to +/- 150 ppm offset. This applies to both 10GE WAN and 10GE LAN modes.

RXT-6200_RXT6000e_Module_Manual

Page 210 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands