VeEX RXT-6000e, User Manual

Page: 28 / 387

Interface
Tapping the Interface setup box opens the Rx Interface screen. The Interface setup options for the Rx are the same as
for the Tx described previously, except for clock offset, which is only available in Tx.
Remember to use an optical attenuator to prevent receiver overload or damage – refer to the SFP chart below to
determine safe levels. Avoid looping back the Tx and Rx on a 1550nm XFP or SFP using a patchcord only – this will
damage the SFP.
Go back to top Go back to TOC
Structure and Payload
SDH Rx Structure and Payload configurations are the same as for SDH Tx setup described previously.
Rx Structure Setup
RXT-6200_RXT6000e_Module_Manual Page 28 of 387