VeEX RXT-6000e, User Manual

Page: 269 / 387

Stream #: Allocated Bandwidth per Stream: The total bandwidth for all streams cannot exceed 100%.
Total (%):
Sum of all stream rates in %.
Throughput Setup - General Settings
Page 2:
#of Streams: From 1 to 10 streams. # of Streams can be specified either on Page 1 or Page 2. It will be
reflected on both pages.
Delay Measurement Mode:
Disable, Round Trip Delay, One-Way Delay with GPS/CDMA or Local One-Way
Delay (for Dual Port Mode).
Round Trip Delay: Round Trip Delay should only be enabled when running the test to a remote
loopback.
One-Way Delay with GPS/CDMA:
One Way Delay (OWD) measurements can be carried out between
two units only when their clocks are synchronized. In order to achieve synchronization, both units must be
synchronized to the same timing source and at the same time. See Chapter 13-1_Ethernet_Setup for a
detailed description of the synchronization process.
Threshold (Max RTD allowed):
Input the value in us, ms or sec. Defines the maximum allowed round trip
delay value. If the RTD value exceeds the threshold, an event is logged with corresponding time stamp.
SDT Threshold and IPG Violation:
SDT: Service Disruption Time
Measure SDT based on IPG (inter packet gap)
SDT Threshold: If the IPG is equal or greater than the threshold configured, the SDT measurement is
triggered.
IPG Violation Threshold: If the IPG is equal to or greater than the configured threshold, a SDT Violation
event is triggered in the Events tab and a SDT Violation is counted in the SDT measurement menu.
RXT-6200_RXT6000e_Module_Manual Page 269 of 387