VeEX RXT-6000e User Manual Download Page 192

Page: 192 / 387

Enabling Ethernet Options on the OTUx Home Menu

The Home menu features different test applications depending on Setup configuration. To enable Ethernet options

(BERT, RFC 2544, Throughput) and access them from the Home menu, select 10GE SYNC or 10GE ASYNC for the

OTN Mapping. For more information on configuring the OTN mapping, please see

Hierarchy

From the menu, select one of the following test modes:

Ethernet Testing, Fibre Channel Testing

SONET/SDH

Testing

, or

OTU-x (-1e, -2e) Testing

OTU-x (-1e, -2e) Testing appears in the Home menu when OTU-1e or OTU-2e options are Enabled or Ordered.

Test Mode Selection

Go back to top

Go back to TOC

RXT-6200_RXT6000e_Module_Manual

Page 192 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands