VeEX RXT-6000e User Manual Download Page 101

Page: 101 / 387

Errors/Alarms (Page 7)

Go back to top

Go back to TOC

Errors/Alarms (Page 8 to 14)

Page 8 to 14 lists the

SDH/PDH Alarms

in logical order that are associated with the signal and payload under test. All

alarms are evaluated and stored.

See SDH details in

Section 7.1

Signal (Pages 1 to 4)

The signal tab displays the Level, Frequency and related screens.

Optical Level (Page 1):

The optical level measurement for OTU-1 and OTU-2 signals is displayed in dBm.

Loss of Signal (LOS) and the Saturation levels is shown both graphically and in dBm.

Signal (Page 1)

Go back to top

Go back to TOC

Frequency (Page 2)

The received signal frequency and offset is measured and displayed.

RXT-6200_RXT6000e_Module_Manual

Page 101 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands