VeEX RXT-6000e User Manual Download Page 85

Page: 85 / 387

Errors/Alarms (Page 8)

Go back to top

Go back to TOC

7.2.3 Event Log

The Event log tab brings up the screen listing the Error and Alarm events recorded during a test. The events are

presented in chronological sequence - number, type of event, start time and duration and duration (alarms) and

ratio/count (errors) are displayed.

Event Log

Go back to top

Go back to TOC

7.2.4 Signal

The Signal tab displays the Level and Frequency screen. Page 1 displays the level measurement in electrical units

(volts) for OC-3, OC-12, OC-48 and OC-192 signals.

Loss of Signal (LOS) and the Saturation level for optical signals is shown graphically including the level measurement

in dBm.

RXT-6200_RXT6000e_Module_Manual

Page 85 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands