VeEX RXT-6000e, User Manual

Page: 102 / 387

For OTN signals, the measurement is performed on the optical interfaces (SFP+ for OTU-1 and OTU-2).
OTN Current: Indicates the frequency of the input signal
Offset (ppm): Indicates the difference between the standard rate and the bit rate of the input signal
Min (ppm): Indicates the difference between the standard rate and the minimum deviation detected in the
input signal
Max (ppm): Indicates the difference between the standard rate and the maximum deviation detected in the
input signal
SDH Current: Indicates the frequency of the SDH or SONET signal carried with the OTU frame
2M Current: Indicates the frequency of the PDH or T-Carrier payload. Options 1.5Mbps, 45Mbps,
34Mbps, 139Mbps
Signal (Page 2)
Go back to top Go back to TOC
Optical Information (Page 3)
The Optical Transceiver (SFP or XFP) information including Vendor name, Part #, Firmware revision #,
Optical Wavelength, Min/Max bit rates supported and Dynamic Range
Signal (Page 3)
Go back to top Go back to TOC
Optical Histogram (Page 4)
Displays the Optical Transceiver Power Measurement Graph.
RXT-6200_RXT6000e_Module_Manual Page 102 of 387