VeEX RXT-6000e User Manual Download Page 138

Page: 138 / 387

G.873 > TU tab

Pointer Sequence Testing

It is recommended to run one sequence with positive adjustments followed by a

sequence with negative adjustments. Performing the measurement at the maximum

positive and negative frequency offset applicable to the line rate increases the stress on

the pointer processor.

The test procedure includes an initialization period followed by a cool down period of

30 seconds with no pointer movements.

Go back to top

Go back to TOC

10.1.5 Trace Identifier

Tap the

Trace

Identifier icon to display the path trace testing application and screens.

SDH/SONET Tools Menu

RXT-6200_RXT6000e_Module_Manual

Page 138 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands