VeEX RXT-6000e, User Manual

Page: 350 / 387

The measurement and event log settings are configured in this screen.
Profile: Last configuration, Delete, Save, Save as..., Default.
Mode: Manual, timed, or auto mode are available.
Manual mode: Starts and stops the measurements manually.
Timed mode: Defines the duration of the test; after the test is started, the test will run for the configured duration and
stop automatically.
TX Start: Separated or Coupled. Configure how the measurements are started by separating or coupling the transmitter and
receiver.
Separated: Independent control (Start/Stop) of the transmitter is enabled. At the start of the test only the receiver is
turned on; the transmitter must be turned on manually.
Coupled: Transmitter and receiver are turned on at the same time, and the measurements start at the same time at
the start of the test.
Results Auto Save : ON/OFF. When ON is selected, results are saved automatically.
Maximum Number of Saved Events: 128, 256, 512, 1024. Maximum number of error and alarm events recorded during a
test.
17.3.4 eCPRI Tests
After setting up test ports and configuring the measurements, tests are available from the
Throughput
and
Packet Capture
options
on the
Home
page.
Actual screens my differ depending on the installed module.
eCPRI Home page
RXT-6200_RXT6000e_Module_Manual Page 350 of 387