VeEX RXT-6000e, User Manual

Page: 264 / 387

Configuration Test
The Config. Tests tab lists the Pass/Fail status of each service and test. Tapping on the table brings up a screen with
CIR
,
CIR/EIR
and
Policing Test
results for the chosen Service.
CIR
,
CIR/EIR Test
, and
Policing
tabs display min,
mean, and max values for IR Mbps , FTD , FDV , Frame Loss Count , and Frame Loss Ratio (%). If Step Load was
selected for the CIR Test, these values will be displayed for each step. If any measured values do not meet the service
test parameters set in the Bandwidth and Threshold tabs, the test fails.
IR Mbps:
Information Rate. Measures the average Ethernet frame rate starting at the MAC address field and
ending at the CRC.
FTD: Measures the time that the frames can take to travel from source to destination.
FDV: Measures the frame jitter.
Frame Loss Count:
Counts the number of lost frames.
Frame Loss Ratio: Ratio of lost frames to the total transmitted frames.
CIR Test - Service 1
CIR test : The test passes if all measured values are below the thresholds configured. If a threshold is disabled, it will
not be evaluated towards pass/fail criteria.
CIR/EIR Test - Service 1
RXT-6200_RXT6000e_Module_Manual Page 264 of 387