VeEX RXT-6000e User Manual Download Page 113

Page: 113 / 387

GCCO Type

Reserved (RES)

bytes are currently undefined in the standard.

Go back to top

Go back to TOC

9.2.3 Optical Data Unit (ODU) Analysis

The ODU overhead is divided into several fields: RES, PM, TCMi, TCM ACT, FTFL, EXP, GCC1/GCC2 and

APS/PCC.

Reserved (RES)

bytes are undefined and set aside for future applications.

Path Monitoring (PM)

Field is similar to the SM field described above. It contains the TTI, BIP-8, BEI, BDI, and Status (STAT)

subfields.

RXT-6200_RXT6000e_Module_Manual

Page 113 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands