VeEX RXT-6000e, User Manual

Page: 366 / 387

Go back to top Go back to TOC
The Aggregate screen displays these parameters:
Line Rate (bps) : This value is always fixed since it depends on the maximum capacity of the link under test, hence the test
interface that is configured.
Utilization: % of Line Rate. For example, if we transmit 100Mbps on a 1Gbps interface then the utilization value is 10% (or
100Mbps) of the total link capacity (or Line Rate).
Utilization (bps)
Framed Rate: (P MAC/IP VLAN Tag + Type/ CRC) / (P Total Overhead) * Line Rate %
(in Mbps).
Data Rate: Payload / (P Total Overhead) * Line Rate %.
Total # of frames, bad frames, and pause frames .
Throughput Results - Global Aggregate
Go back to top Go back to TOC
The Global Signal screen (fiber ports only) displays the optical level measured by the CFP2 or QSFP+ transceiver.
Throughput Results - Global Signal Page 1
RXT-6200_RXT6000e_Module_Manual Page 366 of 387