VeEX RXT-6000e, User Manual

Page: 252 / 387

Setup
For Header , Frames , Thresholds , Throughput , Latency , Frame Loss , and Burst , please refer to Setup - Standard
Mode .
Background - General
# of Back. Streams: From 1 to 7 streams
RFC 2544 Test Stream (%): This is the max rate set in frame loss
Background Stream # (%):
Allocated Bandwidth per Stream: The total bandwidth for all streams cannot
exceed 100%
Total (%): Sum of all stream rates in %
Setup - Background - General
Background - Traffic
Background Stream #:
Select a stream number to configure.
Traffic Flow: Select from Constant, Ramp, Burst, or Single Burst traffic flow.
Frame Size (Type): Fixed or Uniform. If uniform is chosen, the user will have to input a minimum and
maximum frame size.
Frame Size (bytes):
If a fixed frame size is chosen, this option is enabled. Enter the frame size when a Layer 2
or 3 is selected. Frame sizes can be from 64bytes to 1518bytes, in addition to jumbo frames up to 10k bytes.
BW (Transmit Bandwidth): Configure the transmit rate for the stream.
The bandwidth allocation per stream is already configured in the General Settings tab, but can be modified
in this screen as well.
RXT-6200_RXT6000e_Module_Manual Page 252 of 387