VeEX RXT-6000e, User Manual

Page: 359 / 387

Go back to top Go back to TOC
Data Tab: Select a test pattern that will be encapsulated in the Ethernet frame payload (for framed mode).
For both Layer 2 and 4 the following pattern is available:
PRBS:
2E31 -1 (147 483 647-bit pattern used for special measurement tasks, [e.g., delay measurements at higher bit
rates])
2^23 -1 (8 388 607 bit pattern primarily intended for error and jitter measurements at bit rates of 34 368 and
139 264 kbps)
2^15 -1 (32 767 bit pattern primarily intended for error and jitter measurements at bit rates of 1544, 2048, 6312,
8448, 32 064 and 44 736 kbps)
All 0's : Set to all zeros
All 1's : Set to all ones
User Defined : 2 bit field
Invert: Normal or inverted
Rx Live : Select checkbox to check that receiver is active and ready to receive data.
Throughput Setup - DATA Settings Layer 4
Go back to top Go back to TOC
RXT-6200_RXT6000e_Module_Manual Page 359 of 387