VeEX RXT-6000e User Manual Download Page 272

Page: 272 / 387

Remote Partner Control

The

Peer-to-Peer

option is available only for RFC 2544 testing. For more information on

Peer-to-Peer

mode, please

see

15.3.1.4 Peer-to-Peer and Asymmetric Testing.

13.5.1.3 Per Stream Configurations

MAC Setup

MAC configuration in the Throughput section features MAC flooding for buffering verification and performance

testing of Ethernet switches.

Source (SRC) and Destination (Dest) flooding:

Enable or Disable.

Flood Range:

Specifies the number of MAC source and/or destination addresses. Enter a number from 0-4095.

The source and/or destination MAC addresses will be incremented by 1 until it reaches the number of times

entered in the flood range.

For information on header configuration please see

13.2.1.1 BERT Header Settings

in the BERT section.

Throughput Setup - Header Settings per Stream

RXT-6200_RXT6000e_Module_Manual

Page 272 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands