VeEX RXT-6000e User Manual Download Page 320

Page: 320 / 387

15.1 Setup

The following Signal parameters can be configured under the Setup tab on the OTU4 Home screen:

The parameters are for TX and RX Coupled - TX and RX configurations are grouped as one block; TX and RX will

have identical configuration.

OTL

Hierarchy:

Allows the user to configure OTN signal and network types, including the bit rate and higher order

mapping, if applicable.

Data

The following fields are pre defined:

Interface:

Optical Module-CFP - For OTN only optical interface is available.

Mapping / Multiplex:

ODU4

Payload:

Bulk

OTU4 Setup Home

Go back to top

Go back to TOC

15.1.1 OTL

Tap the OTL tab on the Setup screen to configure the OTL Tx Lane Mapping and Skew.

RXT-6200_RXT6000e_Module_Manual

Page 320 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands