Technolas Victus User Manual Download Page 39

Page: 39 / 207

Installation, commissioning, service, cali‐

bration, decomissioning and disposal

4.1

Installation and comissioning

Initial installation and commissioning are exclusively performed by Author‐

ized Service Technicians.
Unauthorized installation and commissioning will void the warranty.

Danger of serious injury in conjunction with improper service or mainte‐

nance!
The medical electrical equipment must not be serviced or maintained while

it is in use with the patient.
– Never service or maintain the medical electrical equipment while it is in

use with the patient.

Hazards due to use of unauthorized accessories / tools / devices!
Only authorized accessories, tools or devices specified in this user manual

are allowed for usage or replacement. Any damage caused by the improper

usage of unauthorized accessories, tools or devices will void the certification

and the warranty. Furthermore it may lead to increased emissions or

decreased immunity of the equipment.
– Do not use other accessories / tools / devices than the ones specified in

this user manual.

After longer periods out of operation, the conditions specified under

Chapter 11.4 ‘Transport and storage conditions’ on page 11 - 4

must be observed.

After longer periods out of operation, the laser system can be started as described
in

Chapter 6.2.3.1 ‘Switching the laser system on and off’ on page 6 - 4

and in

Chapter 8.1.1 ‘Starting and closing the software’ on page 8 - 1

CAUTION

WARNING

CAUTION

Longer periods out of opera‐

tion

INSTALLATION, COMMISSIONING, SERVICE, CALIBRATION, DECOMISSIONING AND

DISPOSAL

SKU: 70005780TPV * Version 6 * UM-100010770 GB

4 - 1

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

UM-100010770 / Version 6 / Page 39 of 207

Summary of Contents for Victus
















































































































































































































Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands

Technolas Victus, User Manual

Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands