Technolas Victus, User Manual

Page: 24 / 207

Danger of fire and/or explosion due to flammable materials, solutions or
gases, or in an oxygen-enriched environment!
There is a risk of fire and/or explosion when the laser output is used in the
presence of flammable materials, solutions or gases, or in an oxygen-
enriched environment.
The high temperatures produced in normal use of the laser system may
ignite some materials, for example cotton wool when saturated with
oxygen. The solvents of adhesives and flammable solutions used for
cleaning and disinfecting should be allowed to evaporate before the laser
system is used.
Attention should also be drawn to the danger of ignition of endogenous
gases.
– Do not use flammable materials, solutions or gases near the product.
– Do not use the laser system in an oxygen-enriched environment.
2.7.4
Mechanical hazard
Danger of injury from tripping!
If the power cable is laid in the open, there is a risk that someone can trip
over the cable and be injured. The power plug and the unit can also be dam‐
aged.
– Lay the power cable in a place where it cannot be tripped over by per‐
sonnel.
– Always connect the power plug in a safe position where it cannot be
damaged or destroyed.
2.7.5
Damage to property
Danger of property damage due to malicious software!
USB memory sticks connected to the product must not be infected with
viruses or other malicious software. Malicious software and viruses may
cause damage that cannot be repaired.
– Do not use USB memory sticks infected with viruses or other malicious
software.
– Before connecting the product to a LAN interface, verify that connected
equipment complies with the requirements for the LAN interface.
L
WARNING
L
CAUTION
NOTICE
SAFETY
2
SKU: 70005780TPV * Version 6 * UM-100010770 GB
2 - 8
TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM
UM-100010770 / Version 6 / Page 24 of 207