manualshive.com logo in svg

Technolas Victus, User Manual

Download the free User Manual for Technolas Victus, a cutting-edge product that revolutionizes your experience. Discover the most advanced features and functionalities, step-by-step instructions with clear illustrations. Enhance your knowledge and expertise by downloading the manual from manualshive.com, and unlock the true potential of Technolas Victus.

Share
Download
background image

3.

Select the treatment you want to perform (

Ä

 Chapter 8.4.5 ‘Selecting treat‐

ments for execution’ on page 8 - 27

).

n

To view the respective procedure parameters, check the parameters in

the relevant  ‘Treatment summary’  screen.
Click 

‘Back’

 to open the associated  ‘Treatment planning’  screen where

you can make necessary changes in the relevant parameter's dialog

boxes.

n

If the treatment is not already recorded in the database, create a new
treatment for this patient (

Ä

 Chapter 8.4.6 ‘Creating treatments’

on page 8 - 28

).

It is not possible to select a treatment that has already been executed. If you

want to perform a similar treatment on the second eye, this treatment has to be

defined separately.

L

 WARNING! Danger of injury due to incorrect parameters!

If parameters are illogical and not within the recommended range, the treat‐

ment results may differ from the desired outcome, which may cause severe

patient injuries.
– Always enter and verify all parameters very carefully.

For detailed information about the relevant procedure parameter values refer to the

‘Addendum to the user manual 

"

VICTUS Femtosecond Laser Platform, SW V3.3

SP02

"

 (English)’

 (document no. 

ADD-100011422

)!

4.

Before starting a treatment, ensure that all parameters are within the

recommended range.

5.

Ask the patient to enter the operating room.

6.

If patients have their hair in a knot or a ponytail, ask the patient to loosen

their hair.

9.4.2 

Positioning the patient on the patient bed

Depending on the 

headrest

 being used, position the patient on the patient bed as

described in the following subchapters.

TREATMENT

9

SKU: 70005780TPV * Version 6 * UM-100010770 GB

 

9 - 9

 

 

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

 

UM-100010770 / Version 6 / Page 135 of 207

Summary of Contents for Victus
















































































































































































































Reviews:

No comments

Related manuals for Victus

Panasonic HF Series Quick Start Manual preview
HF Series
Brand: Panasonic Pages: 9
parr 1108 Operating Instructions Manual preview
1108
Brand: parr Pages: 20
Landoll 2110 Operator'S Manual preview
2110
Brand: Landoll Pages: 71
York Fitness 2110 Owner'S Manual preview
2110
Brand: York Fitness Pages: 4
W&H 206 Operator'S Manual preview
206
Brand: W&H Pages: 23
Bartscher 105 Original Instruction Manual preview
105
Brand: Bartscher Pages: 24
Faderfox DL3 User Manual preview
DL3
Brand: Faderfox Pages: 8
Velleman HQ Power VDL25BM Quick Start Manual preview
HQ Power VDL25BM
Brand: Velleman Pages: 3
iGuzzini Whisper Manual preview
Whisper
Brand: iGuzzini Pages: 36
Waterous AQUIS ULTRAFLOW Installation And Operation Manual preview
AQUIS ULTRAFLOW
Brand: Waterous Pages: 56
B medical systems MRB 3000 SDD Instructions For Use Manual preview
MRB 3000 SDD
Brand: B medical systems Pages: 28
Biosonic Suvi Elite Quick Start Manual preview
Suvi Elite
Brand: Biosonic Pages: 2
Petzl NAVAHO BOD Instructions For Use Manual preview
NAVAHO BOD
Brand: Petzl Pages: 7
SHOWTEC RGB Studio Beam Driver Product Manual preview
RGB Studio Beam Driver
Brand: SHOWTEC Pages: 16
SOUND FUSION Equine DR II Service Manual preview
FUSION Equine DR II
Brand: SOUND Pages: 178
Qtx Derby9 Manual preview
Derby9
Brand: Qtx Pages: 6
Hussmann KH14 Installation Manual preview
KH14
Brand: Hussmann Pages: 20
Fri-Jado STG 5-I Instructions Manual preview
STG 5-I
Brand: Fri-Jado Pages: 48

Brands by name

Popular brands

Load more brands