Technolas Victus User Manual Download Page 13

Page: 13 / 207

Introduction

1.1

VICTUS™ Femtosecond Laser Platform

The VICTUS™ Femtosecond Laser Platform is an ophthalmologic system based on

femtosecond technology and is used to treat a wide variety of ophthalmologic

indications.
The following treatments are available:

The laser system is able to perform steps of a cataract treatment.
For this purpose, an additional OCT (optical coherence tomography) device is

available to help plan the procedure and monitor the treatment.

For details refer to

Chapter 5.3.1 ‘Cataract procedures’ on page 5 - 3

The laser system allows very precise, preprogrammed, 3-dimensional patterns to

be cut into the cornea of the human eye. These patterns are cut using infrared

light pulses with spot sizes of approximately 10 μm and pulse duration of several

hundred femtoseconds. The infrared light is focused into the cornea and induces

optical breakdown or photodisruption with practically no heat. This results in the

formation of gas bubbles.
The user can arrange these patterns in various ways, so that various surgical inci‐

sions are possible, for example, a laser-generated LASIK flap.

For details refer to

Chapter 5.3.2 ‘Corneal procedures’ on page 5 - 4

Furthermore, the laser system is able to perform various therapeutic treatments.

For details refer to

Chapter 5.3.3 ‘Therapeutic procedures’ on page 5 - 4

1.2

Scope of delivery

VICTUS™ Femtosecond Laser Platform

User manual "VICTUS™ Femtosecond Laser Platform, SW V3.3 SP02"

Addendum to the user manual "VICTUS™ Femtosecond Laser Platform,

SW V3.3 SP02" (English)

Patient bed (delivered with 2 fuses)

– User manual "Laser Patient Bed LS Comfort" by AKRUS GmbH & Co KG or
– User manual "Patient Support System PSS S60" by AKRUS GmbH & Co KG

Accessories and tools (refer to

Chapter 7 ‘Accessories and tools’ on page 7 - 1

)

– Plug adapter

Cataract treatments

Corneal treatments

Therapeutic treatments

INTRODUCTION

SKU: 70005780TPV * Version 6 * UM-100010770 GB

1 - 1

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

UM-100010770 / Version 6 / Page 13 of 207

Summary of Contents for Victus
















































































































































































































Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands

Technolas Victus, User Manual

Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands