Technolas Victus, User Manual

Page: 110 / 207

Parameter dialog box Definition
‘Chord length [µm]:’ (Primary) Length of the primary corneal incision from PI 125 level to the pos‐
terior end of the primary corneal incision (measured in chord
length).
‘Side port 1’ Option to perform a secondary corneal incision 1.
‘Outer width [mm]:’ ( ‘Side port 1’ ) Adjust the outer width of the secondary incision 1.
‘Inner width [mm]:’ ( ‘Side port 1’ ) Adjust the inner width of the secondary incision 1.
‘Axis [°]:’ ( ‘Side port 1’ ) Select the position of the secondary incision 1. This position may be
changed according to the cyclorotation of the eye after the patient
has been docked.
‘Chord length [µm]:’ (Side port 1) Length of the secondary corneal incision 1 from PI 125 level to pos‐
terior end of the secondary corneal incision 1 (measured in chord
length).
‘Side port 2’ Option to perform a secondary corneal incision 2.
‘Outer width [mm]:’ ( ‘Side port 2’ ) Adjust the outer width of the secondary incision 2.
‘Inner width [mm]:’ ( ‘Side port 2’ ) Adjust the inner width of the secondary incision 2.
‘Axis [°]:’ ( ‘Side port 2’ ) Select the position of the secondary incision 2. This position may be
changed according to the cyclorotation of the eye after the patient
has been docked.
‘Chord length [µm]:’ (Side port 2) Length of the secondary corneal incision 2 from PI 125 level to pos‐
terior end of the secondary corneal incision 2 (measured in chord
length).
Every parameter change updates the respective B scan image automatically (Fig. 72).
The parameter value of
‘Depth [µm]:’ ‘Plane 1’ must be lower than the parameter
value of ‘Depth [µm]:’ ‘Plane 2’ and the parameter value of ‘Depth [µm]:’ ‘Plane 2’
must also be lower than the parameter value of ‘Depth [µm]:’ ‘Plane 3’ .
‘Incision options’ dialog
boxes
SOFTWARE
8
SKU: 70005780TPV * Version 6 * UM-100010770 GB
8 - 44
TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM
UM-100010770 / Version 6 / Page 110 of 207