Technolas Victus User Manual Download Page 46

Page: 46 / 207

With this procedure, the anterior capsulotomy is performed intraocularly by

means of the laser system. The correct positioning of the capsulotomy cut on the

anterior capsular surface can be verified by means of an integrated optical coher‐

ence tomography (OCT) device before starting the cutting process.

This procedure generates precise cuts inside the cataractous lens, leading to a

softening and fragmentation of the lens. The correct positioning of the cuts inside

the lens can be verified by means of an OCT before starting the laser-assisted

fragmentation process.

With this procedure, the laser system is used for patients undergoing cataract sur‐

gery or other ophthalmic treatment requiring penetrating cuts / incisions in the

cornea.

This procedure creates cuts in the outer area of the cornea and very close to the

sclera. These penetrating cuts / incisions are done at patients undergoing a cata‐

ract surgery for direct access into the eye. The correct position and shape of the

cuts can be verified by the video image.

5.3.2

Corneal procedures

The corneal treatment comprises the following procedure:

Flap

This procedure cuts a corneal flap. The flap is generated by cutting a bed parallel

to the anterior surface of the cornea and a rim or side cut with a hinge. This proce‐

dure enables the user to define flap parameters such as the depth, the diameter

of the bed, the position and the width of the hinge, and the angle of the rim cut in

relation to the cornea.

5.3.3

Therapeutic procedures

The therapeutic treatment comprises the following procedures:

Crosslinking

Intracorneal ring segments tunnel

Lamellar keratoplasty

Penetrating keratoplasty

The crosslinking software module provides certain advantages compared to the

conventional method. By creating a bed and incisions for inserting Riboflavin, the

Riboflavin does not have to be dripped onto the eye but can be inserted directly

under the bed, and the cornea absorbs the Riboflavin faster. Furthermore, the epi‐

thelium does not have to be removed.

Capsulotomy

Lens fragmentation

Arcuate incisions

Corneal incisions

Flap

Crosslinking

CLINICAL APPLICATIONS

SKU: 70005780TPV * Version 6 * UM-100010770 GB

5 - 4

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

UM-100010770 / Version 6 / Page 46 of 207

Summary of Contents for Victus
















































































































































































































Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands

Technolas Victus, User Manual

Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands