Technolas Victus User Manual Download Page 187

Page: 187 / 207

Troubleshooting chart

Danger of injury due to improper repair!
Improperly executed work in conjunction with troubleshooting may lead to

serious injuries and significant property damage.
– Perform only troubleshooting tasks that local personnel can perform

according to the troubleshooting chart.

– If you are in doubt about how to perform the troubleshooting tasks that

are described in the troubleshooting chart, contact an Authorized

Service Technician.

– Troubleshooting tasks that are not described in the troubleshooting

chart must be performed only by Authorized Service Technicians.

Fault description

Cause

Remedy

Personnel

Laser system cannot be

started by turning the system

key to the ‘On’ position.

The main switch on the

bottom side of the laser

system is switched off

(position ‘0’ ).

Press the main switch to posi‐

tion ‘I’ .

Turn the system key to the

‘On’ position.

Assistant

User

Laser system is not ready for

operation, although power is

on.

‘Laser Stop’ button is acti‐

vated.

Ensure that the cause of the

laser stop has been removed

before unlocking the ‘Laser

Stop’ button.

Assistant

User

Authorized

Service Tech‐

nician

‘Reset’ button is illuminated

blue.

Press the blue ‘Reset’ button

until it is not illuminated any‐

more.

Assistant

User

Patient bed has not been ref‐

erenced.

Reference the patient bed.

Assistant

User

Laser system is not ready for

operation. ‘System test’

status indicator is illuminated

orange or gray.

Functionality tests have not

been performed successfully.

Contact an Authorized Service

Technician.

Authorized

Service Tech‐

nician

Startup tests have not been

performed successfully.

Contact an Authorized Service

Technician.

Authorized

Service Tech‐

nician

Not all startup tests have

been performed.

Perform the missing startup

tests.

Assistant

User

‘Laser position test’ failed.

The laser source has not

warmed up / stabilized yet.

If the ‘Laser position test’ fails

repeatedly, even after 20

minutes warm-up, contact an

Authorized Service Techni‐

cian.

Authorized

Service Tech‐

nician

WARNING

Laser system in general

TROUBLESHOOTING CHART

SKU: 70005780TPV * Version 6 * UM-100010770 GB

10 - 1

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

UM-100010770 / Version 6 / Page 187 of 207

Summary of Contents for Victus
















































































































































































































Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands

Technolas Victus, User Manual

Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands