Technolas Victus, User Manual

Page: 109 / 207

8.5.4
Parameters for corneal incisions
Precondition:
n
A corneal incisions procedure must be selected (Fig. 70).
Fig. 70: ‘Corneal incisions’ parameters dialog box
For general information about how to view or specify parameter values refer to
Ä Chapter 8.5.1 ‘Parameters for capsulotomy’ on page 8 - 36. Parameter-specific
information are described below.
The dialog box shows the automatically updated B scan images of the primary cor‐
neal incision ( ‘Primary’ ), the secondary incision 1 ( ‘Side port 1’ )and/or the secon‐
dary incision 2 ( ‘Side port 2’ ) (Fig. 71).
Fig. 71: ‘Corneal incisions’ parameters dialog box
Parameters
Parameter dialog box Definition
‘Primary’ Perform a primary corneal incision.
‘Outer width [mm]:’ ( ‘Primary’ ) Adjust the outer width of the primary incision according to the size
of the selected IOL.
‘Inner width [mm]:’ ( ‘Primary’ ) Adjust the inner width of the primary incision according to the size
of the selected IOL.
‘Axis [°]:’ ( ‘Primary’ ) Select the position of the primary incision. This value may be
changed according to the cyclorotation of the eye after the patient
has been docked.
‘Corneal incisions’ dialog
box
SOFTWARE
8
SKU: 70005780TPV * Version 6 * UM-100010770 GB
8 - 43
TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM
UM-100010770 / Version 6 / Page 109 of 207