Technolas Victus, User Manual

Page: 54 / 207

6.2.5
Force display
The force display (Fig. 11) is a control device that indicates important treatment
parameters.
Pos. Name Description
1
‘REGULAR
PRESSURE’ LED
While docking the patient's eye to the laser system with regular pressure, the
‘REGULAR PRESSURE’ LED (Fig. 11/1) gives the surgeon additional information
about the pressure. If Fig. 11/1 is referred to, this LED will be stably illuminated
when the docking pressure is correct. This is only valid for corneal treatments,
therapeutic treatments, the arcuate incisions procedure and the corneal
incisions procedure!
2 ‘SOFT PRESSURE’
LED
While docking the patient's eye to the laser system for cataract treatments, the
‘SOFT PRESSURE’ LED (Fig. 11/2) gives the surgeon additional information
about the pressure. If Fig. 11/2 is referred to, this LED will be stably illuminated
when the docking pressure is correct. This is only valid for cataract treat‐
ments, except for the arcuate incisions procedure and the corneal incisions
procedure!
3 Shear force LEDs 25 LEDs display the shear forces that are exerted on the eye (Fig. 11/3). The
LEDs are arranged in a circle.
4
‘WORKING’ control
LED
After starting up the laser system, the force display performs a self check. Each
of the shear force (x/y-) and vertical force (z-) LEDs blinks twice. When the
check is completed, the control LED (Fig. 11/4) is illuminated green.
5
Position of the
patient
6.2.6
Laser ring light illumination switch
The laser ring light illumination switch (Fig. 12/1) allows the user to switch the
illumination of the laser ring light on/off.
Fig. 11: Force display
Fig. 12: Laser ring light illumination
HARDWARE
6
SKU: 70005780TPV * Version 6 * UM-100010770 GB
6 - 6
TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM
UM-100010770 / Version 6 / Page 54 of 207