Technolas Victus User Manual Download Page 67

Page: 67 / 207

Software

8.1

Working with the software

Navigation and editing of elements within the graphical user interface are identical to
a Microsoft

Windows operating system.

The laser system software can be operated from either of the two locations:

Assistant workstation

Surgeon control screen

The laser system software can be operated and managed by different personnel
(

Chapter 2.6 ‘Personnel requirements’ on page 2 - 4).

Fig. 20: Error message (example)

Problems are indicated by error messages.

8.1.1

Starting and closing the software

Danger of property damage due to aborted warm-up of the laser system!
The laser system must only be used after the warm-up has been completed.

If you do not allow the laser system to warm up properly, the entire laser

system may be permanently damaged.
– Do not abort warm-up.
– For initial start-up, wait at least 20 minutes after having turned the

system key to the ‘On’ position. Only after waiting that 20 minutes,

press the blue ‘Reset’ button. After having pressed the ‘Reset’ button,

wait for at least 20 minutes (automatic countdown).

Precondition:

The laser system and the monitors are switched on (

Chapter 6.2.3.1

‘Switching the laser system on and off’ on page 6 - 4

Operating the software

Error messages

Starting the software

NOTICE

SOFTWARE

SKU: 70005780TPV * Version 6 * UM-100010770 GB

8 - 1

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

UM-100010770 / Version 6 / Page 67 of 207

Summary of Contents for Victus
















































































































































































































Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands

Technolas Victus, User Manual

Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands