Technolas Victus User Manual Download Page 62

Page: 62 / 207

NOTICE!

Contamination of the spacer cone lens occurs if alcohol enters the

spacer cone!
Contaminations of the spacer cone lens can only be removed by Authorized

Service Technicians.
– Do not spray alcohol into the spacer cone.

Wipe the spacer cone with a lint-free cleaning cloth and some alcohol.

Wipe the oculars with a lint-free cleaning cloth and some alcohol.

Switch off the laser system.

Use a soft dry cleaning cloth to wipe the keyboard.

NOTICE!

Danger of property damage due to aggressive cleaning agents

and moisture!
The assistant workstation and surgeon control screen are electronic devices

and are made of plastics.
– Do not use cleaning agents or abrasive powders that dissolve plastics.
– Ensure that no moisture enters the assistant workstation or the surgeon

control screen.

– Ensure that the ventilation slots of the monitors remain open.

Follow the instructions on the cleaning kit for computers to clean the assis‐

tant workstation and the surgeon control screen.

Switch off the laser system.

Wipe the mattress of the patient bed with a damp soft cloth.

Wait until the patient bed is dry before using it.

Refer to the user manual of the patient bed that you use.

Cleaning the spacer cone

Cleaning the oculars of the

surgical microscope

Cleaning the assistant work‐

station and the surgeon con‐

trol screen

Cleaning the patient bed

HARDWARE

SKU: 70005780TPV * Version 6 * UM-100010770 GB

6 - 14

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

UM-100010770 / Version 6 / Page 62 of 207

Summary of Contents for Victus
















































































































































































































Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands

Technolas Victus, User Manual

Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands