Technolas Victus, User Manual

Page: 111 / 207

Fig. 72: ‘Corneal incisions’ ‘Incision options: Primary incision’ parameters dialog box (example)
Parameters
Parameter dialog box Definition
o ‘One plane’
‘Depth [µm]:’ ( ‘Plane 1’ ) Depth of the first plane of the primary incision, secondary incision 1
or secondary incision 2.
‘Angle [°]:’ ( ‘Plane 1’ ) Cutting angle for the first plane of the primary incision, secondary
incision 1 or secondary incision 2.
o ‘Two planes’
‘Depth [µm]:’ ( ‘Plane 2’ ) Depth in which the second plane of the primary incision, secondary
incision 1 or secondary incision 2 ends.
‘Length [µm]:’ ( ‘Plane 2’ ) Length of the second plane of the primary incision, secondary inci‐
sion 1 or secondary incision 2.
o
‘Three planes’
‘Depth [µm]:’ ( ‘Plane 3’ ) Depth in which the final plane of the primary incision, secondary
incision 1 or secondary incision 2 ends.
‘Angle [°]:’ ( ‘Plane 3’ ) Cutting angle for the third plane of the primary incision, secondary
incision 1 or secondary incision 2.
‘Chord length [µm]:’ Length of the corneal incision from PI 125 level to the posterior end
of the corneal incision (measured in chord length).
SOFTWARE
8
SKU: 70005780TPV * Version 6 * UM-100010770 GB
8 - 45
TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM
UM-100010770 / Version 6 / Page 111 of 207