Technolas Victus User Manual Download Page 189

Page: 189 / 207

Fault

description

Cause

Remedy

Personnel

Ask the patient to leave the patient bed very carefully.

Solve the problem, if possible.

Otherwise call an Authorized Service Technician, if necessary

Emergency

shutdown in

the laser

system.

Emergency shut‐

down has been

initiated auto‐

matically by fail‐

ures.

If an emergency shutdown occurs during a treatment, make

sure that the eye suction is automatically switched off. Other‐

wise switch it off.
Lower the patient bed and swing it in the patient entry posi‐

tion.
Refer to the user manual "Laser Patient Bed LS Comfort" by

AKRUS GmbH & Co KG.

Unfasten the VELCRO

strapping, if used.

Ask the patient to leave the patient bed very carefully.

Call an Authorized Service Technician.

Authorized

Service

Technician

Fault description

Cause

Remedy

Personnel

‘Supply temperature’ and/or

‘Current flow’ are not in the

specified range.

Room temperature and/

or current flow are out‐

side of the specified

range.

Shut down the laser system and

try to restart it.

If the problem persists, contact

an Authorized Service Techni‐

cian.

Assistant

User

Authorized

Service Techni‐

cian

Fault description

Cause

Remedy

Personnel

LED bar display flashes at regular

intervals.

Error in the vacuum

pump unit.

Contact an Authorized

Service Technician.

Authorized Service

Technician

Fault description

Cause

Remedy

Personnel

Monitors are blank although power

is on.

Monitors have been switched off

separately.

Switch on the

monitors.

Assistant

User

Power cables / PC cables are not

plugged in.

Plug in the cables.

Assistant

User

Chiller

Suction status controller

Assistant workstation,

surgeon control screen

TROUBLESHOOTING CHART

SKU: 70005780TPV * Version 6 * UM-100010770 GB

10 - 3

TPV Controlled Document / Status: Effective / Effective Date: Jun 14, 2017 2:38:46 PM

UM-100010770 / Version 6 / Page 189 of 207

Summary of Contents for Victus
















































































































































































































Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands

Technolas Victus, User Manual

Search results

Summary of Contents for Victus

Reviews:

Related manuals for Victus

Brands by name

Popular brands