Still LXT 120, Original Instructions Manual

Page: 89 / 324

Access to these settings is protected by a fleet
manager password.
Three options are available for the "Access
authorisation for the fleet manager" variant:
1
No fleet manager password
Access to the configuration menus is not
enabled. If access is required at a later
date, the authorised service centre must
set up a fleet manager password.
2 Standard fleet manager password
The standard fleet manager password is
"1111".
For safety reasons, this standard fleet
manager password must be changed af-
ter the first use. See also the section en-
titled "Changing the fleet manager pass-
word".
3 Individual fleet manager password
The individual fleet manager password is
noted on the order confirmation and on
the industrial truck invoice.
NOTE
Access to the settings menu is available only
if the industrial truck is at a standstill and the
parking brake is applied. If the parking brake
is released prematurely, the settings menu will
close.
–
Stop the industrial truck.
–
Apply the parking brake.
–
Press the button.
–
Press the softkey.
The first menu level appears.
Operation
4
Display-operating unit
77 50078078001 EN - 07/2022 - 04