–
Push the hand lever (1) downwards as far
as it will go. The coupling pin snaps down.
It is correctly engaged if the control pin (2)
does not protrude from its guide.
The tow coupling is closed.
NOTE
To protect the lower coupling pin bush against
contamination, always keep the tow coupling
closed.
Maximum support load
Depending on the mounting location, the fol-
lowing maximum support loads are permitted
for the tow tractor and the platform tractor:
Rear:
Max. 700 kg (differs from the speci-
fication on the identification plate of
the tow coupling)
Front: Max. 100 kg (differs from the speci-
fication on the identification plate of
the tow coupling)
WARNING
Possible component damage!
If the maximum support loads specified here are ex-
ceeded, this may cause damage to the axles, for
example.
RO230B tow coupling (variant)
Important information
NOTE
Only use STILL approved tow couplings for
the tow tractors and the platform tractors.
NOTE
Only the authorised service centre is permitted
to mount or replace the tow couplings. The
approved fasteners, adapter plates and speci-
fied tightening torques must be used for this
purpose.
Operation
4
Trailer and load
191
50078078001 EN - 07/2022 - 04
Summary of Contents for LXT 120
