Still LXT 120 Original Instructions Manual Download

Page: 216 / 324

–

The battery door must remain open during

charging.

–

Expose the surfaces of the battery cells.

–

Do not place any metal objects on the bat-

tery.

–

Fully open any protective structures (e.g.

fabric-covered cab).

–

Have fire extinguishing equipment ready.

Performing battery maintenance

The cell covers of the battery must be kept dry

and clean.
Terminals and cable shoes must be clean,

lightly coated with battery grease and screwed

on tightly.

–

Neutralise any spilt battery acid immediate-

ly.

–

Observe the safety regulations for handling

battery acid; see the chapter entitled "Bat-

tery acid".

Damage to cables and battery male

connectors

CAUTION

There is a risk of short circuit if cables

are damaged.
Do not crush the battery cable when

closing the battery door.

–

Check the battery cable for damage.

–

When removing and reinstalling the

battery, ensure that the battery cables

are not damaged.

–

Ensure that the battery cable does

not collide with the battery door.

Operation

Handling the lead-acid batteries

204

50078078001 EN - 07/2022 - 04

Summary of Contents for LXT 120





































































































































































































































































































































Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands

Still LXT 120, Original Instructions Manual

Search results

Summary of Contents for LXT 120

Reviews:

Related manuals for LXT 120

Brands by name

Popular brands