Still LXT 120, Original Instructions Manual

Page: 180 / 324

Opening and closing the rear folding
platform panel
The rear platform panel is locked via the two
rear bars (6) on the platform panels on the
right-hand and left-hand side.
–
Open and close the two rear bars as descri-
bed in the previous two chapters. The rear
platform panel can be opened or closed.
Loading a platform
DANGER
Increased risk of accidents due to unauthorised
loading and improper use!
–
Never exceed the maximum loads shown! These
values apply to compact and homogeneous loads.
–
Do not transport people on the loading surface.
–
Always distribute and secure the load even-
ly on the platform. A platform tractor with a
load capacity of 2 t may be loaded with a
maximum of 1 t each on the front and rear
load floor. With a load capacity of 3 t, each
with a maximum of 1.5 t.
–
Transportation of loose bulk material on
the loading surface is not permitted. This
must be transported in suitable containers.
Small parts smaller than 10 mm wide can
get into the battery or engine compartment
through gaps and cause damage and haz-
ards there.
–
The load must not exert any point load on
the load floors. A surface load distributed
over the size of a europallet (1200 mm ×
800 mm) is appropriate.

Operation
4
Trailer and load
168 50078078001 EN - 07/2022 - 04