Still LXT 120, Original Instructions Manual

Page: 236 / 324

–
Do not place any metal objects or tools on
the battery.
NOTE
The battery cable guard (2) is designed to
prevent the battery cable from being trapped
when the battery door is closed. Therefore,
after charging, fix the battery cable guard over
the battery cable again. When doing so, place
the battery cable guard midway along the
edge of the battery tray, as shown in the adja-
cent figure. To do this, tighten the two star-grip
handles in a clockwise direction.
–
Keep away from naked flames. Do not
smoke.
–
Connect the battery male connector to the
plug on the battery charger.
–
Start the battery charger.
The charging process starts automatically.
The display signals the charging process by
illuminating the LEDS as a chase light. The
battery charger will indicate when the battery
is fully charged. Only disconnect the battery
from the charger if no current is flowing.
NOTE
Observe the information in the operating in-
structions for the battery and the battery
charger.
NOTE
The battery has no memory effect. Therefore,
it can be charged in any charge state without
the capacity of the battery being impaired.
NOTE
At ambient temperatures below 0°C, the
charging process will take much longer.
After charging
CAUTION
Risk of component damage!
–
Switch off the battery charger before disconnect-
ing the charging cable.

Operation
4
Handling the lithium-ion batteries
224 50078078001 EN - 07/2022 - 04