Still LXT 120, Original Instructions Manual

Page: 245 / 324

Changing the battery using a
crane
DANGER
Risk of death from suspended loads!
–
Never walk or stand underneath suspended loads.
–
The hoist must be designed to carry the weight of
the battery (see battery plate or nameplate).
WARNING
Risk of crushing and shearing!
–
Do not reach between the battery and chassis.
WARNING
Risk of truck damage due to uncontrolled swivelling
movements!
–
Position the crane directly above the battery.
–
Prevent the battery from swivelling.
CAUTION
Danger of truck damage if original batteries are not
used!
–
The replacement battery must be identical in size
and weight to the original battery.
–
Contact your authorised service centre if there are
any differences in height or weight.
CAUTION
Risk of damage to electrical and electronic compo-
nents due to short circuits!
Connecting or disconnecting the battery with the in-
dustrial truck switched on may cause damage to
electrical and electronic components.
–
Always turn off the key switch.
Preparing
–
Park the industrial truck on level ground.
–
Apply the parking brake.
–
Switch off the key switch.
–
Open the battery hood; see the chapter
entitled "Opening and closing the battery
hood" at the beginning of this main chapter.
Operation
4
Replacing and transporting the battery
233 50078078001 EN - 07/2022 - 04