The driving speed display is replaced by the
symbol. If the industrial truck is then not
moved, the electric parking brake is reapplied
and the symbol is displayed again.
Automatic actuation of the electric park-
ing brake when the industrial truck is
stationary
The electric parking brake is applied automati-
cally when the industrial truck is stationary in
the following situations:
Automatically triggered actuation when the industrial truck is stationary
Cause
Effect
The driver's seat is vacated.
The electric parking brake will make a noise
when it is applied.
The LED (2) lights up with a steady light.
The accelerator pedal is released (brake pedal
not actuated).
After a specified delay, the electric parking
brake is applied with an audible sound.
The LED (2) lights up with a steady light.
On a gradient, the industrial truck is held in
place by the traction motor for 3 seconds. Then
the electric parking brake is applied.
The industrial truck is switched off.
The electric parking brake is immediately ap-
plied with an audible sound.
The LED (2) will light up briefly with a steady
light until the control units switch off.
The emergency off switch is actuated.
The electric parking brake is immediately ap-
plied with an audible sound.
The LED (2) lights up with a steady light.
If the electric parking brake has applied auto-
matically, the symbol appears in the dis-
play-operating unit. The LED (2) lights up.
–
To release the electric parking brake, the
driver must sit down on the driver's seat
again.
–
Press the accelerator pedal.
The electric parking brake will make a noise
when it is released. The LED (2) goes out.
Operation
4
Driving
136
50078078001 EN - 07/2022 - 04
Summary of Contents for LXT 120
