Still LXT 120, Original Instructions Manual

Page: 271 / 324

The next maintenance due date can be set
up and adjusted by the fleet manager. See
the next section "Setting up and adjusting the
due date counter for maintenance and safety
checks".
NOTE
The maintenance interval can also be config-
ured in the status line.
Setting up and adjusting the due
date counter for maintenance
and safety checks
On delivery from the factory, the display-oper-
ating unit indicates to the driver the number
of operating hours until the standard mainte-
nance intervals of 1000 h and 3000 h are
due. The display also shows the latest date
for maintenance.
To do this, proceed as follows:
–
Press the
Service
softkey.
–
Press the
Maintenance interval
softkey.
Setup and adjustment by the fleet man-
ager
For the fleet manager, due date counters are
also defined for the following checks:
●
Regular testing of the truck for electric
trucks and IC trucks
●
Battery testing for electric trucks
●
Exhaust gas testing and LPG testing for IC
trucks
For these tests, the fleet manager can define
the corresponding due dates with his access
authorisation. To do this, proceed as follows:
–
Activate the "Access authorisation for the
fleet manager".
–
Press the
Service
softkey.
–
Press the
Maintenance interval
softkey.
2120 h
04.02.22
880 h
3000-h interval
Latest date:
1000-h interval
6219 _ 003-332 _en

Maintenance
5
General maintenance information
259 50078078001 EN - 07/2022 - 04