Still LXT 120, Original Instructions Manual

Page: 248 / 324

Display messages
Messages
Certain conditions on the industrial truck may
cause event-related messages to be shown
on the display of the display-operating unit.
There are messages about operation and
messages about the industrial truck. If a mes-
sage about operation appears, the display-op-
erating unit will prompt you to perform an
action. A message about the industrial truck
means that the truck control unit has detected
a fault.
The following types of message may appear
individually or in combination:
●
A graphic symbol
●
The message
●
An error code consisting of a letter and a
four-digit number
In the case of successive events, the respec-
tive messages are displayed one after another
on the display.
After a few seconds, the display will alternate
between the last shown display and the mes-
sage.
Messages about operation
If messages about operation appear on the
display-operating unit, an action must be car-
ried out.
Shown on display Cause/action
Log in
The access authorisation (variant) is preventing the
use of the industrial truck.
- Enable the access authorisation.
Battery empty
The battery charge state is too low for the use of the
industrial truck.
- Charge the battery.
Battery: Emergency mode
The battery charge state is low. Power in the industri-
al truck is reduced.
- Charge the battery.
Check battery acid level
The acid level of the lead-acid battery is too low.
- Check the acid level of the battery. Correct if neces-
sary.
Operation
4
Display messages
236 50078078001 EN - 07/2022 - 04