background image

FOREWORD

 

Make sure to read this manual carefully and keep it handy for future reference.

 

When leasing or transferring this tractor, deliver this manual together with the tractor.

 

The specifications in this manual are subject to change without notice.

< NOTE >

Congratulations,  and  welcome  to  the  fabulous  world  of 

CK2610CHSE  /  CK3510(H,C,CH)SE  / 

CK4010(H,C,CH)SE 

ownership, where serious work is made fun again! 

This  versatile  tractor  is  a  culmination  of  the  entire  tractor  and  diesel  engine  knowledge  gained  by  the 

Daedong  Industrial Co.,LTD

  over  the  years  since  1947. The 

CK2610CHSE  /  CK3510(H,C,CH)SE  / 

CK4010(H,C,CH)SE 

and has been designed with the finest materials and under rigid quality control stan-

dards  set forth by the 

KIOTI

 Engineering Department.

Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new 

owner's familiarize themselves with the 

KIOTI CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE

it is the policy of 

KIOTI

 tractor to provide an owner's manual which includes helpful information about tractor 

safety, operation and maintenance. If the information you seek is not found in this manual, your 

KIOTI

 trac-

tor dealer will be happy to help you. 

Please feel free to contact 

DAEDONG IND. CO.,LTD

 with your questions/concerns. 

TC220-영문-수출향(법인향)-OM-00.indd   1

2020-02-20   오후 2:51:50

Summary of Contents for CK2610CHSE























































































































































































































































Reviews: