Daedong CK2610CHSE, Manual

Page: 104 / 246

4
-
cK2610chse / cK3510(h,c,ch)se / cK4010(h,c,ch)se
the position control lever is used to
adjust the height of implements on
the 3-point hitch ends.
the implement attached to the lifting
arm can be lowered by pushing the
lever while the implement is raised
by pulling the lever.
in order to limit the lowering height of
implements, use the lock bolt (2) to
limit the operating range of the lever.
for detailed information, refer to “how
to drive” in chapter 5.
turning the knob counterclockwise
increases the lowering speed while
turning it clockwise decreases the
lowering speed. also, turning it clock-
wise to its end can fix the implement
to a certain position.
(1) lowering speed control Knob
(a) high speed (b) low speed
liFting arm (lower linK)
speed control Knob
this knob does not control the lift-
ing speed of the lift arm.
note
tC2O427b
this joystick lever is used mainly to
operate the front end loader when at-
tached to the tractor.
for detailed information, refer to
"handling loader" in chapter 6.
t22O406a
(1) joystick lever
joysticK lever
TC220-영문-수출향(법인향)-OM-04.indd 36 2020-12-10 오전 10:45:49