background image

© Copyright 2019

Printed

1

Figure 1

Notes

1.

This manual is written with the assumption that the 
tractor is not supplied with rear remotes or backhoe.

2.

This valve kit is designed to operate hydraulic 
cylinders.

3.

For further assistance write to:

Land Pride Service Department

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address: [email protected]

Assembly Instructions

Assembly Instructions

Initial Preparations

1.

Park tractor on a flat surface, place gear shift lever in 
park, turn off engine, and remove ignition key.

Valve Assembly

Refer to Figure 1 & Figure 2:

1.

Attach valve assembly support bracket (#1) to 
existing holes “C” on right-hand side of loader frame 
with M18-2.5 x 100 bolts (#7), 3-1/4" long tube (#3), 
3-1/2" long tube (#4), flat washers (#11), and 
nuts (#9) as shown. Tighten nuts (#9) to the correct 
torque.

2.

Route hydraulic hoses (#16 & #22) under the tractor 
platform and rearward toward the loader valve.

37026

11

3

9

C

1

7

11

4

9

7

For color photos, visit 

https://dealers.landpride.com/en/12036/dealer-training

and look for “Third Function Valves.”

Figure 2

Connect Hydraulic Hoses to Power 
Beyond Ports

1.

Place chocks in front and back of tractor's left rear 
wheel.

2.

Loosen lug nuts on right rear wheel. Do not remove 
lug nuts at this time.

3.

Jack right rear wheel off the ground and place a jack 
stand under the right rear axle.

4.

Lower right rear axle onto the jack stand. The rear 
wheel should be slightly off the ground. Make sure 
jack stand is secure and will not slip out from under 
the tractor axle.

5.

Remove lug nuts and right rear wheel.

6.

Locate and remove the steel tube that is connected 
to the power beyond port.

37027

Right-

Hand Side

Left-Hand 

Side

Attach to 
positive (+) 
post on the 
tractor battery

IMPORTANT:  

Land Pride recommends that your 

dealer connect hydraulic hoses (#16 & #22) to your 
tractor’s power beyond ports. Improper hook-up 
could cause damage to your tractor or valve.

For B2320 Kubota Tractors with LA304 Loader,
B2620 Kubota Tractors with LA364 Loader, and
B2301 & B2601 Kubota Tractors with LA434 Loader

Manual No. 380-151M

Third Function Valve Kit #380-149A 
Installation Instructions

5/3/19

Reviews: