Daedong CK2610CHSE, Manual

Page: 174 / 246

6
-
16
ck2610chse / ck3510(h,c,ch)se / ck4010(h,c,ch)se
2. roll back & dump
"roll back" means that the bucket
scoops up. to operate this func-
tion, move the joystick lever to
the left (A). "dump" means that
the bucket dumps. to operate this
function, move the joystick lever to
the right (b).
3. float
the floating function is activated
when the joystick lever is pushed
(A) bucket roll back (b) bucket dump
one position further to forward
from the down position. when the
lever is in this position, the boom
moves up and down freely along
the surface of the ground as the
hydraulic line is opened from the
valve to the boom cylinder. this
function is useful when removing
soft objects on hard ground (for
example, when removing snow or
sand on paved road.
4. down & roll back
the boom can be lowered and the
bucket can scoop up by operating the
joystick lever to the front left position
(10 o’clock position). however, the
operation time may not be shortened
much since the boom is lowered first
and then the bucket is rolled back due
to unbalanced hydraulic pressure in
the hydraulic circuit.
5. down & dump
the boom can be lowered and the
bucket can dump by operating the
joystick lever to the front right posi-
tion (2 o’clock position). however,
these two operations may not be
performed simultaneously due to
unbalanced hydraulic pressure in
the hydraulic circuit.
6. up & roll back
the boom can be lifted and the
bucket can scoop up by operating
the joystick lever to the rear left
position (7 o’clock position). how-
ever, these two operations may not
be performed simultaneously due
to unbalanced hydraulic pressure
in the hydraulic circuit.
7. up & dump
the boom can be lifted and the
bucket can dump by operating the
joystick lever to the rear right posi-
tion (5 o’clock position). however,
the operation time is may not short-
ened much since the bucket dumps
first and then the boom is lifted due
to the unbalanced hydraulic pres-
sure in the hydraulic circuit.
T22O605A
TC220-영문-수출향(법인향)-OM-06.indd 16 2020-01-23 오전 9:18:01